MODELING OF THE INFLUENCE OF THE THERMOMECHANICAL MODIFICATION PARAMETERS ON THE STRUCTURAL CHANGES IN POLYESTER FIBERS

MODELING OF THE INFLUENCE OF THE THERMOMECHANICAL MODIFICATION PARAMETERS ON THE STRUCTURAL CHANGES IN POLYESTER FIBERS

Authors

  • Valentin Velev KONSTANTIN PRESLAVSKI UNIVERSITY OF SHUMEN, SHUMEN 9712, 115, UNIVERSITETSKA STR.
  • Valentin Grozev KONSTANTIN PRESLAVSKI UNIVERSITY OF SHUMEN, SHUMEN 9712, 115, UNIVERSITETSKA STR.
  • Anton Popov UNIVERSITY "PROF. DR. ASSEN ZLATAROV" – BURGAS, 8000, BURGAS, BULGARIA
  • Rene Androsch MARTIN LUTHER UNIVERSITY, HALLE-WITTENBERG, CENTER OF ENGINEERING SCIENCES, 06217, MERSEBURG, GERMANY
  • Todor Dimov KONSTANTIN PRESLAVSKI UNIVERSITY OF SHUMEN, SHUMEN 9712, 115, UNIVERSITETSKA STR.
  • Lyubomira Veleva PAUL SCHERRER INSTITUTE, NUCLEAR ENERGY AND SAFETY DEPARTMENT, SWITZERLAND
  • Hans-Joachim Radusch MARTIN LUTHER UNIVERSITY, HALLE-WITTENBERG, CENTER OF ENGINEERING SCIENCES, 06217, MERSEBURG, GERMANY

DOI:

https://doi.org/10.46687/jsar.v5i1.126

Keywords:

poly (ethylene terephthalate), fibers, heat - mechanical treatment, tensile stress, strain-induced crystallization, modeling, differential scanning calorimetry

Abstract

In the present work is proposed an attempt for modeling of the complex influence of the heat mechanical treatment parameters on the structure developments in as-spun polyester fibers. Freshly molded poly(ethylene terephthalate) (PET) filaments with different preliminary orientation were subjected to simultaneously thermal and mechanical treatments. PET yarns were sequentially undergoing to uniaxially strain-stress with values of 40 MPa, 80 MPa, and 120 MPa at three different temperatures in a narrow temperature range from 850C to 950C. Differential scanning calorimetry (DSC) has been used to study the structural rearrangements in the heat-mechanically processed PET fibers. Response equations have been obtained showing the relationship between the parameters of the thermal deformation experiment and the desired degree of crystallinity of the studied PET fibers.

Author Biographies

Valentin Velev, KONSTANTIN PRESLAVSKI UNIVERSITY OF SHUMEN, SHUMEN 9712, 115, UNIVERSITETSKA STR.

KONSTANTIN PRESLAVSKI UNIVERSITY OF SHUMEN, SHUMEN 9712, 115, UNIVERSITETSKA STR.

Valentin Grozev, KONSTANTIN PRESLAVSKI UNIVERSITY OF SHUMEN, SHUMEN 9712, 115, UNIVERSITETSKA STR.

KONSTANTIN PRESLAVSKI UNIVERSITY OF SHUMEN, SHUMEN 9712, 115, UNIVERSITETSKA STR.

Anton Popov, UNIVERSITY "PROF. DR. ASSEN ZLATAROV" – BURGAS, 8000, BURGAS, BULGARIA

UNIVERSITY "PROF. DR. ASSEN ZLATAROV" – BURGAS, 8000, BURGAS, BULGARIA

Rene Androsch, MARTIN LUTHER UNIVERSITY, HALLE-WITTENBERG, CENTER OF ENGINEERING SCIENCES, 06217, MERSEBURG, GERMANY

MARTIN LUTHER UNIVERSITY, HALLE-WITTENBERG, CENTER OF ENGINEERING SCIENCES, 06217, MERSEBURG, GERMANY

Todor Dimov, KONSTANTIN PRESLAVSKI UNIVERSITY OF SHUMEN, SHUMEN 9712, 115, UNIVERSITETSKA STR.

KONSTANTIN PRESLAVSKI UNIVERSITY OF SHUMEN, SHUMEN 9712, 115, UNIVERSITETSKA STR.

Lyubomira Veleva, PAUL SCHERRER INSTITUTE, NUCLEAR ENERGY AND SAFETY DEPARTMENT, SWITZERLAND

PAUL SCHERRER INSTITUTE, NUCLEAR ENERGY AND SAFETY DEPARTMENT, SWITZERLAND

Hans-Joachim Radusch, MARTIN LUTHER UNIVERSITY, HALLE-WITTENBERG, CENTER OF ENGINEERING SCIENCES, 06217, MERSEBURG, GERMANY

MARTIN LUTHER UNIVERSITY, HALLE-WITTENBERG, CENTER OF ENGINEERING SCIENCES, 06217, MERSEBURG, GERMANY

Downloads

Published

09.03.2023

How to Cite

Velev, V. ., Grozev, V. ., Popov, A. ., Androsch, R. ., Dimov, T. ., Veleva, L. ., & Radusch, H.-J. . (2023). MODELING OF THE INFLUENCE OF THE THERMOMECHANICAL MODIFICATION PARAMETERS ON THE STRUCTURAL CHANGES IN POLYESTER FIBERS: MODELING OF THE INFLUENCE OF THE THERMOMECHANICAL MODIFICATION PARAMETERS ON THE STRUCTURAL CHANGES IN POLYESTER FIBERS. JOURNAL SCIENTIFIC AND APPLIED RESEARCH, 5(1), 173–180. https://doi.org/10.46687/jsar.v5i1.126

Most read articles by the same author(s)