HYBRID SPARE-PARTS LOGISTICS IN ENGINEERING SYSTEMS: A 3S MODEL FOR STORE, SOURCE, OR SYNTHESIZE DECISIONS: HYBRID SPARE-PARTS LOGISTICS IN ENGINEERING SYSTEMS: A 3S MODEL FOR STORE, SOURCE, OR SYNTHESIZE DECISIONS

Yordanka Yankova-Yordanova; Nikolay Yordanov

doi:10.46687/jsar.v31i1.512

Authors

Yordanka Yankova-Yordanova Department of Engineering Logistics, Faculty of Technical Sciences, Konstantin Preslavsky University of Shumen, Shumen 9712, 115 Universitetska St., e-mail: j.jordanova@shu.bg
Nikolay Yordanov Department of Engineering Logistics, Konstantin Preslavsky University of Shumen, Shumen 9712, 115 Universitetska St., e-mail: n.yordanov@shu.bg

DOI:

https://doi.org/10.46687/jsar.v31i1.512

Keywords:

Engineering logistics, Spare parts, Additive manufacturing, 3D printing, Digital inventory, Maintenance logistics, Inventory management, Resilience

Abstract

Spare-parts availability is a critical condition for technical continuity in production, transport and other engineering systems. Traditional inventory strategies provide rapid response but may create high holding costs, obsolescence and tied capital, whereas external sourcing introduces lead-time dependence. Additive manufacturing adds a third option by enabling selected components to be produced on demand from digital data. This conceptual paper develops a hybrid decision framework that combines these alternatives in a 3S model: Store, Source, Synthesize. The model evaluates spare parts according to criticality, supply lead time, downtime cost, demand frequency, additive-manufacturing feasibility, material and quality requirements, legal and warranty constraints, and lifecycle economics. The study synthesizes peer-reviewed research on additive manufacturing in spare-parts supply chains and positions 3D printing as a selective logistics option rather than a universal substitute for physical inventory. The resulting framework is intended for preliminary classification and decision support; it requires organisation-specific validation before quantitative thresholds are introduced.

Author Biographies

Yordanka Yankova-Yordanova, Department of Engineering Logistics, Faculty of Technical Sciences, Konstantin Preslavsky University of Shumen, Shumen 9712, 115 Universitetska St., e-mail: j.jordanova@shu.bg

Department of Engineering Logistics, Faculty of Technical Sciences, Konstantin Preslavsky University of Shumen, Shumen 9712, 115 Universitetska St., e-mail: j.jordanova@shu.bg

Nikolay Yordanov, Department of Engineering Logistics, Konstantin Preslavsky University of Shumen, Shumen 9712, 115 Universitetska St., e-mail: n.yordanov@shu.bg

Department of Engineering Logistics, Konstantin Preslavsky University of Shumen, Shumen 9712, 115 Universitetska St., e-mail: n.yordanov@shu.bg

References

Khajavi, S. H., Partanen, J., & Holmström, J. (2014). Additive manufacturing in the spare parts supply chain. Computers in Industry, 65(1), 50–63. https://doi.org/10.1016/j.compind.2013.07.008.

Knofius, N., van der Heijden, M. C., & Zijm, W. H. M. (2016). Selecting parts for additive manufacturing in service logistics. Journal of Manufacturing Technology Management, 27(7), 915–931. https://doi.org/10.1108/JMTM-02-2016-0025.

Mecheter, A., Pokharel, S., & Tarlochan, F. (2022). Additive manufacturing technology for spare parts application: A systematic review on supply chain management. Applied Sciences, 12(9), 4160. https://doi.org/10.3390/app12094160.

Cardeal, G., Leite, M., & Ribeiro, I. (2023). Decision-support model to select spare parts suitable for additive manufacturing. Computers in Industry, 144, 103798. https://doi.org/10.1016/j.compind.2022.103798.

Westerweel, B., Basten, R. J. I., & van Houtum, G.-J. (2018). Traditional or additive manufacturing? Assessing component design options through lifecycle cost analysis. European Journal of Operational Research, 270(2), 570–585. https://doi.org/10.1016/j.ejor.2018.04.015.

Coruzzolo, A. M., Balugani, E., & Gamberini, R. (2022). Spare parts management with Additive Manufacturing (AM): A critical review. IFAC-PapersOnLine, 55(10), 1159–1164. https://doi.org/10.1016/j.ifacol.2022.09.546.

Naghshineh, B., Fragoso, M., & Carvalho, H. (2023). Rethinking additive manufacturing for spare parts supply chain management. Research-Technology Management, 66(4), 38–47. https://doi.org/10.1080/08956308.2023.2207970.

HYBRID SPARE-PARTS LOGISTICS IN ENGINEERING SYSTEMS: A 3S MODEL FOR STORE, SOURCE, OR SYNTHESIZE DECISIONS